Standard CCBC |
 |
 |
Dimensional characteristics :
|
L = Steel Tube Length. |
|
| Length of low density cartridge : from 30 mm to 2000 mm. | |
Current standard diameters:Stainless steel tube : 9.45 - 10 - 11 - 12 - 12.5 - 12.7 - 13 - 14 - 15 - 15.8 - 16 - 16.5- 17 - 18 - 19 - 20 - 22 - 24 - 25 - 26 and 32.
Brass tube : 12.7
Other diameters on demand.
Tolerances :
On the diameter : -0 +0.2mm.
On the length : ± 2mm.
On the straightness : 0.1mm/100 mm.
On the power : +5% -10%.
On the ohm value : +10% -5% of the value calculated under heat.
Variations in the quantities in demand
|
Ordered pieces |
Variations |
|
1 to 5 |
No variations |
|
6 to 9 |
+1 -0 |
|
10 to 19 |
+2 -0 |
|
20 to 49 |
+3 -0 |
|
50 to 99 |
+4 -0 |
|
100 and + |
+5% -0 |
Limits of manufacturing
|
Stainless steel |
Brass |
|
|
Specific charge on the cartridge : |
7 W/cm² |
4 W/cm² |
|
Max. temperature on the sheath : |
650° C |
350° C |
|
Max. temperature of the part : |
300° C |
Important : the charge above is given for information only. For utilizations at very high temperatures, we recommend not to change the CCBC over :
|
7.0 W/cm² to 500°C : |
|
The hole fit between the CCBC and its casing must be between 0.2 and 0.3 mm and it must be the closest to the minimum when the charge or the temperature are high . |
|
CCBC Ø |
Max. intensity |
Max. power (standard execution) |
|||||
|
400 V |
230 V |
110 V |
48 V |
24 V |
12 V |
||
|
9.45 to 12 |
4.5 A |
1800 W |
1035 W |
495 W |
216 W |
108 W |
54 W |
|
12.5 to 14.5 |
5.5 A |
2200 W |
1265 W |
605 W |
264 W |
132 W |
66 W |
|
15 to 17 |
7.0 A |
2800 W |
1610 W |
770 W |
336 W |
168 W |
84 W |
|
17.5 to 21 |
10.0 A |
4000 W |
2300 W |
1100 W |
480 W |
240 W |
120 W |
|
22 to 28 |
13.5 A |
5400 W |
3105 W |
1485 W |
648 W |
324 W |
162 W |
|
29 to 40 |
16.0 A |
6400 W |
3680 W |
1760 W |
768 W |
384 W |
192 W |
NB : for other characteristics contact us.
For utilizations to high temperature, you can increase CCBCs' longevity with thermocouple J ( Fe/Co) or K (NiCr/NiAl)incorporated.